Part Number Hot Search : 
A1030 EL6253CU 1346014 500UA E2SDA AS3BJ RASH732P C2163
Product Description
Full Text Search
 

To Download TZ800N Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 N
Netz-Thyristor-Modul Phase Control Thyristor Module
Datenblatt / Data sheet
TZ800N
TZ800N Kenndaten
Elektrische Eigenschaften / Electrical properties Hochstzulassige Werte / Maximum rated values Periodische Vorwarts- und Ruckwarts-Spitzensperrspannung Tvj = -40C... Tvj max repetitive peak forward off-state and reverse voltages Vorwarts-Stospitzensperrspannung non-repetitive peak forward off-state voltage Ruckwarts-Stospitzensperrspannung non-repetitive peak reverse voltage Durchlastrom-Grenzeffektivwert maximum RMS on-state current Dauergrenzstrom average on-state current Stostrom-Grenzwert surge current Grenzlastintegral It-value Kritische Stromsteilheit critical rate of rise of on-state current Kritische Spannungssteilheit critical rate of rise of off-state voltage TC = 85C TC = 75C Tvj = 25 C, tP = 10 ms Tvj = Tvj max, tP = 10 ms Tvj = 25 C, tP = 10 ms Tvj = Tvj max, tP = 10 ms DIN IEC 747-6 f = 50 Hz, iGM = 1 A, diG/dt = 1 A/s Tvj = Tvj max, vD = 0,67 VDRM 6.Kennbuchstabe / 6th letter F Tvj = -40C... Tvj max Tvj = +25C... Tvj max
Elektrische Eigenschaften
VDRM,VRRM 1200 1600 VDSM VRSM ITRMSM ITAVM ITSM It (diT/dt)cr (dvD/dt)cr 1200 1600 1300 1700
1400 V 1800 V 1400 V 1800 V 1500 V 1900 V 1500 A 800 A 955 A 35.000 A 30.000 A 6.125.000 As 4.500.000 As 200 A/s
1000 V/s
Charakteristische Werte / Characteristic values Durchlaspannung on-state voltage Schleusenspannung threshold voltage Ersatzwiderstand slope resistance Zundstrom gate trigger current Zundspannung gate trigger voltage Nicht zundender Steuerstrom gate non-trigger current Nicht zundende Steuerspannung gate non-trigger voltage Haltestrom holding current Einraststrom latching current Vorwarts- und Ruckwarts-Sperrstrom forward off-state and reverse current Zundverzug gate controlled delay time
Tvj = Tvj max , iT = 3000 A Tvj = Tvj max Tvj = Tvj max Tvj = 25C, vD = 6 V Tvj = 25C, vD = 6 V Tvj = Tvj max , vD = 6 V Tvj = Tvj max , vD = 0,5 VDRM Tvj = Tvj max , vD = 0,5 VDRM Tvj = 25C, vD = 6 V, RA = 2
vT V(TO) rT IGT VGT IGD VGD IH
max.
1,5 V 0,85 V 0,17 m
max. max. max. max. max. max. max. max. max.
250 mA 2V 10 mA 5 mA 0,2 V 500 mA 2500 mA 150 mA 4 s
Tvj = 25C, vD = 6 V, RGK 10 IL iGM = 1 A, diG/dt = 1 A/s, tg = 20 s Tvj = Tvj max vD = VDRM, vR = VRRM DIN IEC 747-6 Tvj = 25 C,iGM = 1 A, diG/dt = 1 A/s iD, iR tgd
prepared by: C.Drilling approved by: J. Novotny
date of publication: revision:
17.03.03 1
BIP AC / BIP AM / 00-08-21, K.-A. Ruther
A 15/00
Seite/page
1/12
N
Netz-Thyristor-Modul Phase Control Thyristor Module
Datenblatt / Data sheet
TZ800N
Tvj = Tvj max, iTM = ITAVM vRM = 100 V, vDM = 0,67 VDRM dvD/dt = 20 V/s, -diT/dt = 10 A/s 5.Kennbuchstabe / 5th letter O RMS, f = 50 Hz, t = 1 min RMS, f = 50 Hz, t = 1 sec tq
Elektrische Eigenschaften / Electrical properties Charakteristische Werte / Characteristic values Freiwerdezeit circuit commutated turn-off time
typ. VISOL
240 s 3,0 kV 3,6 kV
Isolations-Prufspannung insulation test voltage
Thermische Eigenschaften / Thermal properties Innerer Warmewiderstand thermal resistance, junction to case
Thermische Eigenschaften Modul / per Module, = 180 sin pro
pro Modul / per Module, DC pro Modul / per Module
RthJC
max. max.
0,0420 C/W 0,0405 C/W
Ubergangs-Warmewiderstand thermal resistance, case to heatsink Hochstzulassige Sperrschichttemperatur maximum junction temperature Betriebstemperatur operating temperature Lagertemperatur storage temperature Mechanische Eigenschaften / Mechanical properties Gehause, siehe Anlage case, see annex Si-Element mit Druckkontakt Si-pellet with pressure contact Innere Isolation internal insulation Anzugsdrehmoment fur mechanische Anschlusse mounting torque Anzugsdrehmoment fur elektrische Anschlusse terminal connection torque Steueranschlusse control terminals Gewicht weight Kriechstrecke creepage distance Schwingfestigkeit vibration resistance
RthCH Tvj max Tc op Tstg
max.
0,01 C/W 125 C
-40...+125 C -40...+130 C
Mechanische Eigenschaften
Seite 3 page 3
AlN Toleranz / Tolerance 15% Toleranz / Tolerance 10% DIN 46 244 G M1 M2 6 18 A 2,8 x 0,8 typ. 2750 g 36 mm f = 50 Hz file-No. 50 m/s E 83336 Nm Nm
Mit diesem Datenblatt werden Halbleiterbauelemente spezifiziert, jedoch keine Eigenschaften zugesichert. Es gilt in Verbindung mit den zugehorigen technischen Erlauterungen. This data sheet specifies semiconductor devices, but promises no characteristics. It is valid in combination with the belonging technical notes.
BIP AC / BIP AM / 00-08-21, K.-A. Ruther
A 15/00
Seite/page
2/12
N
Netz-Thyristor-Modul Phase Control Thyristor Module
Datenblatt / Data sheet
TZ800N
Mabild Mabild Mabild
2
45
1
TZ
BIP AC / BIP AM / 00-08-21, K.-A. Ruther
A 15/00
Seite/page
3/12
N
Netz-Thyristor-Modul Phase Control Thyristor Module
Datenblatt / Data sheet
TZ800N
R,T - Werte Di R,T-Werte
Analytische Elemente des transienten Warmewiderstandes Z thJC fur DC Analytical elements of transient thermal impedance Z thJC for DC 1 0,0011 0,01 2 0,00267 0,0188 3 0,00866 0,30347 4 0,02313 4,994 5 0,00507 9,98
n max
Pos. n Rthn [C/W] n [s]
6
7
Analytische Funktion / Analytical function:
Z thJC =
n=1
S
R thn 1 - e
-t
tn
Verstarkte Kuhlung / Forced cooling 1 Module pro Kuhlkorper / 1 modules per heatsink Kuhlkorper / Heatsink type: KW70 (4 l/min.) Analytische Elemente des transienten Warmewiderstandes Z thCA Analytical elements of transient thermal impedance Z thCA Pos. n Rthn [C/W] n [s] 1 0,00214 9,89 2 0,00035 13 3 0,0245 31,3 4 5 6 7
nmax
Analytische Funktion / Analytical function:
Z thCA =
n=1
SR
thn
1 -e
-t
tn
BIP AC / BIP AM / 00-08-21, K.-A. Ruther
A 15/00
Seite/page
4/12
N
Netz-Thyristor-Modul Phase Control Thyristor Module
Datenblatt / Data sheet
TZ800N
= 60 180
Diagramme
0,040
0
Trans. Warmewiderstand bei Sinus
0
180
0,030
0,020
0,010
0,000 0,01 0,1 1 t [s] 10 100
Transienter innerer Warmewiderstand je Zweig / Transient thermal impedance per arm ZthJC = f(t) Sinusformiger Strom / Sinusoidal current Parameter: Stromfluwinkel / Current conduction angle
Trans. Warmewiderstand bei Rechteck
0,040
0
= 60 120 DC
0,030
0
180
0,020
0,010
0,000 0,001 0,01 0,1 t [s] 1 10 100
Transienter innerer Warmewiderstand je Zweig / Transient thermal impedance per arm ZthJC = f(t) Rechteckformiger Strom / Rectangular current Parameter: Stromfluwinkel / Current conduction angle
BIP AC / BIP AM / 00-08-21, K.-A. Ruther
A 15/00
Seite/page
5/12
N
Netz-Thyristor-Modul Phase Control Thyristor Module 1200
Diagramme
Datenblatt / Data sheet
TZ800N
120 180
1000
0
Durchgangsverluste bei Sinus 90
0
180
60 Q = 30
800 600 400 200 0 0 200 400 600 ITAV [A] 800 1000
Durchlassverlustleistung je Zweig / On-state power loss per arm PTAV = f(ITAV) Sinusformiger Strom / Sinusoidal current Strombelastung je Zweig / Current load per arm
Berechnungsgrundlage PTAV (Schaltverluste gesondert berucksichtigen) Calculation base PTAV (switching losses should be considered separately)
Durchgangsverluste bei Rechteck
1500
0
Parameter: Stromfluwinkel / Current conduction angle
DC
0
180
180 120 90
1000 Q = 30
60
500
0 0 200 400 600 800 ITAV [A]
Durchlassverlustleistung je Zweig / On-state power loss per arm PTAV = f(ITAV) Rechteckformiger Strom / Rectangular current Strombelastung je Zweig / Current load per arm
1000
1200
1400
Berechnungsgrundlage PTAV (Schaltverluste gesondert berucksichtigen) Calculation base PTAV (switching losses should be considered separately) Parameter: Stromfluwinkel / Current conduction angle
BIP AC / BIP AM / 00-08-21, K.-A. Ruther
A 15/00
Seite/page
6/12
N
Netz-Thyristor-Modul Phase Control Thyristor Module 140 120 TC [C] 100 80 60 40
Datenblatt / Data sheet
TZ800N
Gehausetemperatur bei Sinus
0
0
180
Q = 30 20 0 200 400
60 600
90
120 800
180 1000
ITAVM [A]
Hochstzulassige Gehausetemperatur / Maximum allowable case temperature TC = f(ITAVM) Sinusformiger Strom / Sinusoidal current Strombelastung je Zweig / Current load per arm
Berechnungsgrundlage PTAV (Schaltverluste gesondert berucksichtigen) Calculation base PTAV (switching losses should be considered separately)
140 120
Gehausetemperatur bei Rechteck
Parameter: Stromfluwinkel / Current conduction angle
0
100 TC [C] 80 60 40 20 0 200 400 600 800 ITAVM [A] 1000 1200
0
180
Q = 30
60
90
120
180
DC
1400
1600
Hochstzulassige Gehausetemperatur / Maximum allowable case temperature TC = f(ITAVM) Rechteckformiger Strom / Rectangular current Strombelastung je Zweig / Current load per arm
Berechnungsgrundlage PTAV (Schaltverluste gesondert berucksichtigen) Calculation base PTAV (switching losses should be considered separately) Parameter: Stromfluwinkel / Current conduction angle
BIP AC / BIP AM / 00-08-21, K.-A. Ruther
A 15/00
Seite/page
7/12
N
Netz-Thyristor-Modul Phase Control Thyristor Module
5000 0,01 0,015
Datenblatt / Data sheet
TZ800N
B2
ID
RthCA [C/W]
4000
Maximaler Strom bei B2 und B6
~
+
R-Last R-load L-Last L-load
0,02 3000 0,03 2000 0,04 0,06 1000 0,08 0,10 0,15 0,20 0,30 0 20 40 T A [C] 60 80 100
-
0 120 0 500 1000 I D [A] 1500 2000
Hochstzulassiger Ausgangsstrom / Maximum rated output current ID B2- Zweipuls-Bruckenschaltung / Two-pulse bridge circuit Gesamtverlustleistung der Schaltung / Total power dissipation at circuit Ptot Parameter: Warmewiderstand zwischen den Gehausen und Umgebung / Thermal resistance cases to ambient RthCA
6000 0,01 5000
R thCA [C/W]
B6
ID
+ 3~
0,015
4000 0,02 0,025 3000 0,03 0,04 0,06 1000 0,10 0,15 0,20 0,40 0 20 40 T A [C] 60 80 100 120 0 500 1000 ID [A] 1500 2000 2500
,
2000
0
Hochstzulassiger Ausgangsstrom / Maximum rated output current ID B6- Sechspuls-Bruckenschaltung / Six-pulse bridge circuit Gesamtverlustleistung der Schaltung / Total power dissipation at circuit Ptot Parameter: Warmewiderstand zwischen den Gehausen und Umgebung / Thermal resistance cases to ambient RthCA
BIP AC / BIP AM / 00-08-21, K.-A. Ruther
A 15/00
Seite/page
8/12
N
Netz-Thyristor-Modul Phase Control Thyristor Module
2500
Datenblatt / Data sheet
TZ800N
R thCA [C/W]
W 1C ~
IRMS
0,02 0,03
0,01
2000
Maximaler Strom bei W1C und W3C
~
0,04
1500
0,06
1000
0,08 0,10 0,15
500
0,20 0,30 0,40 0,60
0 0 20 40 TA [C] 60 80 100 120
0
500
1000
I RMS [A]
1500
2000
Hochstzulassiger Effektivstrom / Maximum rated RMS current IRMS W1C - Einphasen-Wechselwegschaltung / Single-phase inverse parallel circuit Gesamtverlustleistung der Schaltung / Total power dissipation at circuit Ptot Parameter: Warmewiderstand zwischen den Gehause und Umgebung / Thermal resistance case to ambient RthCA
6000 0,01 5000 0,015
~ ~ ~
R thCA [C/W]
~
W 3C ~
~
IRMS
4000
0,02 0,025
3000
0,03 0,04 0,06
2000
1000
0 0
0,10 0,15 0,20 0,40 20 40 60 T A [C] 80 100 120 0 500 1000 I RMS [A] 1500 2000
Hochstzulassiger Effektivstrom / Maximum rated RMS current IRMS W3C - Dreiphasen-Wechselwegschaltung / Three-phase inverse parallel circuit Gesamtverlustleistung der Schaltung / Total power dissipation at circuit Ptot Parameter: Warmewiderstand zwischen den Gehausen und Umgebung / Thermal resistance cases to ambient RthCA
BIP AC / BIP AM / 00-08-21, K.-A. Ruther
A 15/00
Seite/page
9/12
N
Netz-Thyristor-Modul Phase Control Thyristor Module 100
Datenblatt / Data sheet
TZ800N Steuercharakteristik
10
c b a
1
0,1 10 100 iG [mA] 1000 10000
Steuercharakteristik vG = f (iG) mit Zundbereichen fur VD = 6 V Gate characteristic vG = f (iG) with triggering area for VD = 6 V Hochstzulassige Spitzensteuerverlustleistung / Maximum rated peak gate power dissipation PGM = f (tg) : a - 20 W/10ms
Zundverzug
b - 40 W/1ms
c - 60 W/0,5ms
1000
100
10
a b
1
0,1 10 100 1000 iGM [mA] 10000
Zundverzug / Gate controlled delay time tgd = f(iG) Tvj = 25C, diG/dt = iGM/1s a - maximaler Verlauf / Limiting characteristic b - typischer Verlauf / Typical characteristic
BIP AC / BIP AM / 00-08-21, K.-A. Ruther
A 15/00
Seite/page
10/12
N
Netz-Thyristor-Modul Phase Control Thyristor Module
10000
Datenblatt / Data sheet
TZ800N Sperrverzogerungsladung
iTM = 2000A 1000A 500A 200A 100A
1000
100 1 10 -di/dt [A/s] 100
Sperrverzogerungsladung / Recovered charge Qr = f(-di/dt) Tvj = Tvjmax, vR 0,5 VRRM, vRM = 0,8 VRRM Parameter: Durchlastrom / On-state current iTM
Grenzstrom
20.000 a
15.000 Ta = 25 C
10.000 b 5.000
0 0,01 0,1 t [s] 1
Grenzstrom / Maximum overload on-state current IT(OV)M = f(t), vRM = 0,8 VRRM a: Leerlauf / No-load conditions b: nach Belastung mit ITAVM / after load with ITAVM TA = 35C, verstarkte Luftkuhlung / Forced air cooling TA = 45C, Luftselbstkuhlung / Natural air cooling
BIP AC / BIP AM / 00-08-21, K.-A. Ruther
A 15/00
Seite/page
11/12
N
Netz-Thyristor-Modul Phase Control Thyristor Module
Datenblatt / Data sheet
TZ800N
I = Uberstrom 0A
TAV (vor)
15.000
10.000
400 A 650 A 800 A 920 A 1000 A
5.000
0 0,01 0,1 1 t [s] 10 100 1000 10000
Uberstrom je Zweig / Overload on-state current IT(OV) B6- Sechspuls-Bruckenschaltung, 120 Rechteck / Six-pulse bridge circuit, 120 rectangular Kuhlkorper / Heatsink type KW70 ( 4l/min. ) Wasserkuhlung / water cooling at TA = 25C
Parameter: Vorlaststrom je Zweig / Pre-load current per arm ITAV(vor)
BIP AC / BIP AM / 00-08-21, K.-A. Ruther
A 15/00
Seite/page
12/12
Nutzungsbedingungen
Die in diesem Produktdatenblatt enthaltenen Daten sind ausschlielich fur technisch geschultes Fachpersonal bestimmt. Die Beurteilung der Geeignetheit dieses Produktes fur die von Ihnen anvisierte Anwendung sowie die Beurteilung der Vollstandigkeit der bereitgestellten Produktdaten fur diese Anwendung obliegt Ihnen bzw. Ihren technischen Abteilungen. In diesem Produktdatenblatt werden diejenigen Merkmale beschrieben, fur die wir eine liefervertragliche Gewahrleistung ubernehmen. Eine solche Gewahrleistung richtet sich ausschlielich nach Magabe der im jeweiligen Liefervertrag enthaltenen Bestimmungen. Garantien jeglicher Art werden fur das Produkt und dessen Eigenschaften keinesfalls ubernommen. Sollten Sie von uns Produktinformationen benotigen, die uber den Inhalt dieses Produktdatenblatts hinausgehen und insbesondere eine spezifische Verwendung und den Einsatz dieses Produktes betreffen, setzen Sie sich bitte mit dem fur Sie zustandigen Vertriebsburo in Verbindung (siehe www.eupec.com, Vertrieb&Kontakt). Fur Interessenten halten wir Application Notes bereit. Aufgrund der technischen Anforderungen konnte unser Produkt gesundheitsgefahrdende Substanzen enthalten. Bei Ruckfragen zu den in diesem Produkt jeweils enthaltenen Substanzen setzen Sie sich bitte ebenfalls mit dem fur Sie zustandigen Vertriebsburo in Verbindung. Sollten Sie beabsichtigen, das Produkt in Anwendungen der Luftfahrt, in gesundheits- oder lebensgefahrdenden oder lebenserhaltenden Anwendungsbereichen einzusetzen, bitten wir um Mitteilung. Wir weisen darauf hin, dass wir fur diese Falle - die gemeinsame Durchfuhrung eines Risiko- und Qualitatsassessments; - den Abschluss von speziellen Qualitatssicherungsvereinbarungen; - die gemeinsame Einfuhrung von Manahmen zu einer laufenden Produktbeobachtung dringend empfehlen und gegebenenfalls die Belieferung von der Umsetzung solcher Manahmen abhangig machen. Soweit erforderlich, bitten wir Sie, entsprechende Hinweise an Ihre Kunden zu geben. Inhaltliche Anderungen dieses Produktdatenblatts bleiben vorbehalten.
Terms & Conditions of usage
The data contained in this product data sheet is exclusively intended for technically trained staff. You and your technical departments will have to evaluate the suitability of the product for the intended application and the completeness of the product data with respect to such application. This product data sheet is describing the characteristics of this product for which a warranty is granted. Any such warranty is granted exclusively pursuant the terms and conditions of the supply agreement. There will be no guarantee of any kind for the product and its characteristics. Should you require product information in excess of the data given in this product data sheet or which concerns the specific application of our product, please contact the sales office, which is responsible for you (see www.eupec.com, sales&contact). For those that are specifically interested we may provide application notes. Due to technical requirements our product may contain dangerous substances. For information on the types in question please contact the sales office, which is responsible for you. Should you intend to use the Product in aviation applications, in health or live endangering or life support applications, please notify. Please note, that for any such applications we urgently recommend - to perform joint Risk and Quality Assessments; - the conclusion of Quality Agreements; - to establish joint measures of an ongoing product survey, and that we may make delivery depended on the realization of any such measures. If and to the extent necessary, please forward equivalent notices to your customers. Changes of this product data sheet are reserved.


▲Up To Search▲   

 
Price & Availability of TZ800N

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X